Sunday, March 31, 2013
Sending out wishes for JOY and HOPE in your lives... I've been tidying up the studio and came across a few more unfinished papier mache eggs to add to the stash. I also came across this wee bird who has only one tail feather left, and one eye. His age is showing, much like mine. We want to sent out greetings to you all. See you soon, I hope! Norma, x
Saturday, March 30, 2013
The sewn bird image I was working on is transforming itself into a postcard design. I cropped it to about a 4X6 size, and I have plans to send it here, which by the way is open to everyone, worldwide, and there's plenty of time to participate, and maybe here. Thanks for dropping by for a visit today; I hope to see you soon! Norma, xo
Thursday, March 28, 2013
Today I spent quite a bit of time preparing materials for and planning a journal page. Everything did not work. I won't bore you with the failure. Really, I was trying to exactly copy something that I loved on line and it is beyond me, my ability, my equipment, my supply bin. I'd made a big mess and wasted a whole day. UNTIL the muse stepped in. The muse told me to do a bird. Do what I know deep inside of myself. I did the bird and while doing it (it took under 3 minutes basically) I remembered a drawer full of Italian candy wrappers that I'd been saving for years to use in art pieces in some way, and the saying "IF YOUR WING IS BROKEN, USE YOUR ANGEL WINGS" popped into my head (I think it might be a direct message to me from the muse, actually) and I thought that the wrappers would make nice gold angel wings and then 2 minutes later, my journal page was complete. Well it took me another few minutes to pen the script (believe me this is a planning piece and not the final.)
But I just wanted to show you what the muse came up with. The bits in the air by the angel wings are what did not work in my original attempt. I just left the bits there (maybe as a reminder not to just copy people!!.)Thanks for dropping in today; we'll see you soon I hope. Norma, x
Monday, March 18, 2013
For those who know me, you've seen this egg a few times. I love it so. For this challenge I have chosen the theme EGG, so it gets to come out and show itself again. I did come across the original mold for it laying in a box and the trick for me will be to see if I can find which box. If I do, I'll make another egg for this challenge, and I may do a little painting. The muse will dictate what transpires.I am inviting you to come and play in this challenge. Are you IN? Leave me a comment at the bottom of this post, and I'll start a players list. I'd love for you to make an egg, decorate an egg, photograph an egg, sculpt an egg, make something with egg in it (and show us,) ask your hen to lay an egg, draw one, paint one...well you get the idea. Do your post this weekend on your blog, and as you will be linked here, everyone will be able to be directed to you! It's easy.
Thanks for coming by; see you soon I hope, hugs, Norma, xP.S. Everyone is welcome to join in the challenges. The PLAYERS: Carole, Sus, Ariane, Patrice, Petra, Tania, Stefanie, Celine, Kristen, Ram, Renilde, BarbaraBee, Emily, Nadine, Mano, Sabine, Justine, Cindi
For this challenge, I had planned to do a new papier mache egg. I have a finished egg, years old now, and a partially finished egg [oh where is it I wonder] and the original plaster mold that I made. Trouble is, I can't find the mold, or the partially finished egg, or even the finished egg, come to it. So...there is nothing to do but make a brand new plaster mold. Let's begin. What is in the white ironstone soup tureen on my highboy?Eggs! From a thrift store find a long time ago. They are still in the bag unopened. Time to open the bags. Here we have: A small plastic egg and a larger egg the size one might find in the grocery store. I am going to make a plaster of paris mold from the smaller size egg. I needed a container to hold the wet plaster [continue reading] so I sliced open the larger egg. I will need to stabilize the larger egg, now called the container, so am using a stash of toothpicks. Perfect. So far! I will need to hold the smaller egg stationary inside the larger container so have poked a hole at the side of the container. I poked a toothpick through the outside of the container and pushed it inside the container and then through a small hole in the small egg shape. This will hold the smaller egg shape in position. I've coated the inside of the container, and the outside of the small egg shape with a thin coat of vaseline to act as a 'release' agent. I have a dedicated vaseline brush for this purpose. The container has been set in place on the bed of toothpicks. The scene is set: Time to pour the wet plaster. I use dental plaster with a ratio of about twice as much plaster as there is water. Add plaster to water; NOT water to plaster. Just keep dropping bits of plaster into the water, and stirring, until you get something the texture of runny jello. If you get to the toothpaste texture, it is too thick and won't pour. Add water drop by drop quickly, until you get it runny. Work fairly quickly as the dental plaster sets up real fast. It also gets warm and even hot, so take care. The most important stage of this whole process is ahead of you. Your goal is to pour in the wet plaster so that it covers the bottom HALF of the small egg shape. So just pour it into the container and watch so that when the level reaches what looks like half of the small egg shape, stop pouring. If you've poured too much, quickly scoop out some plaster [but it has already started to harden up so work quickly if you have to do this.] Also, try not to pour directly on top of the little egg shape, or to splash wet plaster on it. The reason is, is that you want the surface of the little egg shape to be virgin. Here, the first half of the plaster has been poured. Note that I use two little balls (in this case, a bead that has been stuck with a toothpick in order to be easily removed,) as the 'register' for the mold. I leave the bead in for just a short while (minutes) and remove it as soon as the plaster has hardened enough to keep the round shape that the bead leaves. This indented shape I call the female part of the register. When I make large molds I leave this to dry overnight. This little mold, I will leave for a few hours (and perhaps leave it on a drying rack I set up, which is a rack placed over an electric cup warmer.) When plaster dries it becomes much much lighter in colour and definitely lighter in weight: Here the registration 'beads' have been removed and have left a nice female registration indent. The rack is set up and I'll leave it for a few hours. Meanwhile, it is tea time!! Well, the time has come to pour in the second half of the mold. The plaster has dried, and so to prepare the mold, just coat the plaster that has dried in the mold, with a thin coat of vaseline. This will ensure that the two halves of plaster WON'T stick together. Actually, I give the dried plaster quite a decent coat of vaseline. I give the egg shape that is visible a little extra dab of vaseline as well, for good measure. Mix up a new batch of plaster as before, and pour it into the mold. You want to cover the egg completely. Give the mold a gently shaking back and forth to help bring the air bubbles to the surface and disencourage them to embed in the plaster right against the small egg shape, or just floating freely in the plaster. But I don't mean to split hairs here. Let dry as before: So the mold has been completely dried and it is time to separate the two pieces. This is the big reveal! TaDa! To do this, remove the plaster mold from the container. In this case, I've used an egg shape piece of plastic for the container and so I'll be able to slice carefully through it, and peel off sections at a time. Oftentimes I use a heavily waxed milk carton and that can be stripped away piece by piece as well. I love using old milk cartons as containers for this reason. Once you have the dried mold free of the container, you will separate the two pieces of plaster to get your two-part mold. You will see where the two pieces of plaster meet. For large molds, I place a flat metal screwdriver end directly at the join and gently whack it with a mallet. I repeat this whacking and sometimes have to give it a really good whack. But for this little mold, I am using the edge of a flat knife and giving it a very very gentle whack with the flat edge of a large bread knife. Twirl the mold around to enter from a different location at the join, and so on, until the mold pieces separate. You might be holding your breath at this stage, and when the mold separates you can take a deep breath! I mostly have a chunk of sculpted plasticine inside the mold for most of this kind of work, and so I would just scoop out the plasticine, chunk by chunk, but here we have plastic. You will have to encourage it out of the mold (whichever half of the mold the small egg shape has decided to stick with) and you will want to be careful not to get wildly energetic about your actions here. If you accidentally gouge into the plaster, it might break, or score scars into the plaster shape. You want virgin plaster if you can keep it. I used an X-acto knife to enter into the small egg shape which is hollow inside and so allows easy access. I did this at an angle and when I pulled up, the small egg popped right out! Now you have two halves of a two-part mold, complete with registration bits. Congratulations. You are half way there!!
*******With your mold you can now make as many papier mache eggs as your heart desires. Let's get started. For the paper, I use paper towels and for the paste I use flour and water. That's it. You can use ready made glue like 'modpodge' or even wood glue. Tear the paper towel into little flakes. View the picture below to see the general size of paper flakes. Mix up a batch of flour and water paste to the consistency that you like. I sometimes drop in a bit of essential oils to discourage mold or bugs. Bugs and mice love to eat dried papier mache. The essential oils are supposed to prevent this. Who knows? For this project, I decided to try modpodge for the first time. As it is a glue, and sealer, and finishing coat all at the same time, it will likely deter pests. Here is what you do: coat the inside of the mold with a thin layer of vaseline to act as a release Be sure to coat the flange area (rim outside of the egg shape) as well. I use my dedicated vaseline brush for this. With a clean brush (NOT the dedicated vaseline brush,) dip the brush into the paste you've made [flour and water], OR, modpodge as I am doing, and then pick up a flake of paper with the brush, and then apply the flake to the mold by pressing in with the brush. Keep going. Overlap the paper flakes. Aim for about 3-4 'layers' of paper. I've used white paper towels, and paper table napkins in a colour, so that I can see the layers. Make sure that you give a nice 'hinge' overlap all the way around the shape by setting the flakes inside the egg and up over the flange area. Here's a few pictures to give you an idea of what you are doing: Do the same with the other mold half. Let them dry. They will dry fairly fast as they are small. When you have two mold halves prepped with paper flakes, give the flange area a nice coat of modpodge or paste if that is what you are using, and place the two mold halves together, matching up the registration marks. Press the two halves together well, and secure all around with a strong rubber band. It just needs to dry now. I have mine baking on my rack with the heat from the cup warmer, so they dried fast. I gave them an hour for good measure: The paper will shrink with drying and will literally pop out of the mold. You can encourage the paper pieces where required. Just pull. Tweezers come in handy here. When the egg comes out of the mold, it will have a flange all of the way around it and you want to remove that and sand it flat and apply more paper flakes for strength. You will do this a section at a time. I am making as flat a join as I can, working on a section at a time. I apply paper flakes to the join, and let it dry. Then move over and cut some more of the flange away, and apply paper flakes and let that dry. Do this until your egg is completely together with no flange left. Here is a photo that shows the egg before it comes out of the mold, and an egg that has come free of the mold, and one I have started to work on by removing a section of flange, a section at a time. It is close to being complete. You can sand the papier mache. Use the finest grit [I use grit P120] you can find (even wet/dry works well although obviously you won't wet it) and smooth out any obvious bumps. You can just keep adding paper flakes with the paste where you want, and let them dry, and sand, and so on until you are satisfied with the shape. You have just made a papier mache egg. Now you can decorate it! That takes us to the third part!
*******Decorating your egg is up to you. My plans are to give it a coat of gesso and then a layer of paint application by throwing the paint onto the surface using an old toothbrush. Then I'll apply a coat of clear gesso and then spray it with a coat of matte finishing spray. That is what my plans are for next weekend, as I'll be continuing to work on my papier mache eggs. See you soon, I hope!
I decided to show you a couple of things I made a few years ago, using this exact procedure of what I have described to you regarding eggs. This fella (a complete working 3 foot high marionette) might just bring you eggs, and the other fella might just steal them. They both have the name Jack. One a jackrabbit and one a trickster.
Saturday, March 16, 2013
dc96: WillowThis one I am sending to you Carole! Thank you for being the host this week and allowing all of us to have such a great time spent on this wonderful theme you have chosen of 'willow.' I've lately been dreaming of little books [again.] It seems they are on my mind in one way [closer to consciousness at times] or the other. I think they might always be on my mind. I've been wanting to try out a Japanese hand sewn binding; and doing a little journal; and using my beloved Saint-Armond paper (I ruined a painting last challenge as you will remember)...by trying a selection of differing mediums on it...; and just sketching a small scale bird which if I don't do on a semi-regular basis makes me a bit crazed [that's my excuse and I'm sticking to it]. This drawing challenge gave me the chance to do all of these things. What evolved is a little journal which has a small bird perched on a willow branch on the front cover. This is done in pigment ink, watercolor, conte pencil, and pencil crayon. The inside pages are an assortment of quality art papers which can allow many different treatments, like drawing, painting, charcoal, inks, acrylics, etc. so that you can dabble at your heart's content. The paper does not have a direction per se, as it is all hand made. Other papers include 50 lb. sketch paper for pencil, pen, pastel, crayon, felt marker or watercolor pencil, wet or dry. One page inside has a small collage with an image transfer and a few words of encouragement. In this journal it says: All it takes is intention and practice. I think this would apply to anything life throws at us. I mean if we want to learn how to do something, or change our behaviour, or attitude, and that sort of thing.
I had such a completely wonderful time making this little journal that I am going to make more of them. I'll make them until I run out of ideas. So I'll be selling them on my etsy shop for $8.00 USD, plus shipping. This is my intention for the next while. Hopefully they will be available soon, and I'll let you know by doing a blog post.Here's a few more shots of this little journal for Carole. It measures 2 3/8" w X 1 1/8" h when closed. And a real close up!! Thank you everyone for dropping by today. I hope to see you again, soon, To see all of the participants for this WILLOW theme challenge, pop in to Carole's blog (highlighted above) where you will be linked. There's some eye candy to see here folks! Ciao.
Sunday, March 10, 2013
dc95: moon This drawing challenge allowed me to pick up an old watercolor painting that I'd started some time ago, and work it into a composition which has the moon as the main feature. I'd forgotten what I'd learned in the first place, with this painting, and so I almost immediately, this go round, ruined it. This paper is a luxurious material that I cherish, but it is like flower petals in its' delicacy. What I mean is, is that whatever is done to it, has to be done with care. Paint loves it and sinks right in to the wonderful softness. There is an almost velvet appearance in person (just like a rose petal for example) and the paper does not like to be rubbed. Like say, with an eraser in a scrubbing motion. In fact it does not like scrubbing period. The paper absorbs the original mark (pencil for example) like it is being forced into the paper fibres. I thought I'd place heavy spots of pastel and then rub them in to blend later. Not much blending took place with rubbing, and the color almost intensified where I'd originally placed it on the surface. In any event, I adore this paper and this session has taught me even more about its' loveliness. And, I enjoyed myself this week, that is for sure. Here is a closer look at my 'rufous-necked stint' in summer attire, viewing a full moon:
I want to especially thank our host this week, Patrice, who chose this completely wonderful theme. I can barely wait to go view all of the art from the different players who joined in for this challenge. To see a selection of great offerings with this theme, pop by to visit Patrice where you will be linked to the blogs.Thanks for dropping by; see you soon I hope! Norma, x
Wednesday, March 6, 2013
The desksurface (my glass table):
The beginning of a fabric/paper collage envelope:
What the envelope is going to contain [one of my birds]:
A little section showing a closer look:
I've a long way to go [painted bird is a large part of the plans] but this is the very beginning! Thank you for dropping in today. Thank you Julia for hosting this wonderful Wednesday wander through many work surfaces and many projects by many participants. If you want to see more workdesks, pop by Julia's spot!Hope to see you again soon! Hugs, Norma, x
Saturday, March 2, 2013
Friday, March 1, 2013
Here is my second attempt at doing collage. This time, a post card. I have to apologize if anyone is offended because I cannot read the Old German Script writing. I don't know the content and I chose it because of the beautiful lettershapes. If it is really inappropriate, will you please let me know!! Here is what the card looked like before I applied the final layer of Dorland's wax:
The wax obliterates the fuzzy paper bits that are left on with the gel transfers I used in this piece. Nothing is perfect, in life, or in art. I am ignoring the imperfect bits and won't bore you by pointing them out. My complete purpose in doing these pieces, is to learn. I am having so much fun, and must say a hearty thank you to BarbaraBee for inspiring me to begin to do collage, AND to Kim for teaching me about the Dorland's wax in the first place. My tip o' the hat to you two ladies.
Thanks for dropping in today, and I hope to see you soon. *smiles* Norma, xp.s. see the little hole in the rose in the middle of the scene? I'm going to cover it over with a stick-on bee.